164
Remote Commands List Limiting Pass/Fail Judgment 3.9.
Remote commands limiting Pass/Fail judgment when selecting Test Parameter are shown in Table 3.9-1 to Table
3.9-6
No. in Table 3.8-1 to Table 3.8-5 corresponds to No. in Table 3.9-1 to Table 3.9-6
Remote Commands for UL CA Tx measurement are available in MT8821C only.
Table 3.9-1: Remote Commands List Limiting Pass/Fail Judgment (1/6)
6.2.2 UE Maximum Output Power
TP_MAXPWR_LL
TP_MAXPWR_UL
6.2.2_1 Maximum Output Power for HPUE
TP_MAXPWR_LL
TP_MAXPWR_UL
6.2.2A.1 UE Maximum Output Power for CA
(intra-band contiguous DL CA and UL CA)
TP_MAXPWR_LL limit, CONTCC
*
1
TP_MAXPWR_UL limit, CONTCC
*
1
6.2.3 Maximum Power Reduction (MPR)
6.2.3_1 Maximum Power Reduction (MPR) for HPUE
6.2.3A.1 Maximum Power Reduction (MPR) for CA
(intra-band contiguous DL CA and UL CA)
TP_MPR1_LL limit, CONTCC
*
1
TP_MPR1_UL limit, CONTCC
*
1
TP_MPR2_LL limit, CONTCC
*
1
TP_MPR2_UL limit, CONTCC
*
1
TP_MPR3_LL limit, CONTCC
*
1
TP_MPR3_UL limit, CONTCC
*
1
6.2.4 Additional Maximum Power Reduction
(A-MPR)
6.2.4_1 Additional Maximum Power Reduction
(A-MPR) for HPUE
6.2.4A.1 Additional Maximum Power Reduction
(A-MPR) for CA (intra-band contiguous DL CA and
UL CA)
TP_MPR1_UL limit, CONTCC
*
1
TP_MPR1_LL limit, CONTCC
*
1
6.2.5 Configured UE Transmitted Output Power
To Next Page
Loading...
