Anritsu MT8820C - Page 165

165
Table 3.9-2: Remote Commands List Limiting Pass/Fail Judgment (2/6)
3GPP Test Item
No.
Channel
Bandwidth
(MHz)
Remote Command
6.2.5_1 Configured UE transmitted Output power for
HPUE
17
-----
TP_CONFPWR1_TOL
18
TP_CONFPWR2_TOL
19
TP_CONFPWR3_TOL
6.2.5A.1 Configured UE Transmitted Output power for
CA (intra-band contiguous DL CA and UL CA)
17
-----
TP_CONFPWR1_TOL limit,
CONTCC *
1
18
TP_CONFPWR2_TOL limit,
CONTCC *
1
19
TP_CONFPWR3_TOL limit,
CONTCC *
1
6.3.2 Minimum Output Power
9
-----
TP_MINPWR_UL
6.3.2A.1 Minimum Output Power for CA
(intra-band contiguous DL CA and UL CA)
9
-----
TP_MINPWR_UL limit, PCC *
1
TP_MINPWR_UL limit, SCC1 *
1
6.3.4.1 General ON/OFF time mask
16
-----
TP_TMASK_GEN_TOL
TP_OFFPWR_UL
6.3.4A.1.1 General ON/OFF time mask for CA
(intra-band contiguous DL CA and UL CA)
16
-----
TP_TMASK_GEN_TOL limit, PCC *
1
TP_OFFPWR_UL limit, PCC *
1
TP_TMASK_GEN_TOL limit, SCC1 *
1
TP_OFFPWR_UL limit, SCC1 *
1
6.3.4.2.1 PRACH time mask
1
-----
TP_TMASK_PRACH_TOL
TP_OFFPWR_UL
6.3.4.2.2 SRS time mask
43
-----
TP_TMASK_SRS_TOL
TP_OFFPWR_UL
6.3.5.1 Power Control Absolute power tolerance
24, 25
-----
TP_PCTABS_TOL
6.3.5_1.1 Power Control Absolute power tolerance for
HPUE
24, 25
-----
TP_PCTABS_TOL
6.3.5A.1.1 Power Control Absolute power tolerance
for CA (intra-band contiguous DL CA and UL CA)
24, 25
-----
TP_PCTABS_TOL limit, PCC *
1
TP_PCTABS_TOL limit, SCC1 *
1
6.3.5.2 Power Control Relative power tolerance
32
-----
TP_PCTREL_RMP_TOL
TP_PCTREL_RMP_CNG_TOL1
TP_PCTREL_RMP_CNG_TOL2
TP_PCTREL_RMP_CNG_TOL3
TP_PCTREL_RMP_E
33
34
35
36
37
38
TP_PCTREL_ALT_TOL