Anritsu MT8820C - Page 252

252
5. Click Add… to open the TCP/IP Address window.
Figure 7.1.2.2-5 Advanced TCP/IP Settings Window (MT8821C)
6. Click Add… to open the TCP/IP Address window.
7. Set IP address and Subnet mask as follows:
IP address: 192.168.20.10
Subnet mask: 255.255.255.0
Figure 7.1.2.2-6 TCP/IPv6 Address Window (MT8821C)
NOTE: Set the Same IP address as the IMS Server IPv6 Address setting which can be found in the IMS
Service settings of the Call Processing Parameters.
Figure 7.1.2.2-7 IMS Server IPv6 Address Setting Screen (MT8821C)
8. Click OK to close the TCP/IPv6 Address window.
9. Click OK twice to close the Internet Protocol (TCP/IP) Properties window.
10. Click Close to close the Application Server1 Status window.
11. Reboot the MT8821C.
12. Select and load the LTE measurement software to Phone1.