Anritsu MT8820C - Page 3

3
TRX Measurements (Fundamental Measurements) ............................................... 763.
TX MEASUREMENTS .............................................................................................................................. 76 3.1.
UE Maximum Output Power (6.2.2) ........................................................................................... 763.1.1.
UE Maximum Output Power for HPUE (6.2.2_1) ....................................................................... 773.1.2.
Maximum Power Reduction (MPR) (6.2.3) ................................................................................. 783.1.3.
Maximum Power Reduction (MPR) for HPUE (6.2.3_1) ............................................................. 793.1.4.
Maximum Power Reduction (MPR) for Multi-Cluster PUSCH (6.2.3_2) ................................... 803.1.5.
Configured UE transmitted Output Power (6.2.5) .................................................................... 813.1.6.
Configured UE transmitted Output Power for HPUE (6.2.5_1) ................................................ 823.1.7.
Minimum Output Power (6.3.2) .................................................................................................. 823.1.8.
General ON/OFF time mask (6.3.4.1) ......................................................................................... 833.1.9.
PRACH time mask (6.3.4.2.1) .................................................................................................... 843.1.10.
SRS time mask (6.3.4.2.2) .......................................................................................................... 85
3.1.11.
Power Control Absolute power tolerance (6.3.5.1) ................................................................ 863.1.12.
Power Control Relative power tolerance (6.3.5.2) .................................................................. 873.1.13.
Aggregate Power Control tolerance (6.3.5.3) ......................................................................... 883.1.14.
Power Control Absolute power tolerance for HPUE (6.3.5.1_1.1) ......................................... 883.1.15.
Power Control Relative power tolerance for HPUE (6.3.5.2_1.2) ........................................... 883.1.16.
Aggregate power control tolerance for HPUE (6.3.5_1.3) ...................................................... 883.1.17.
Frequency Error (6.5.1) ............................................................................................................. 893.1.18.
Error Vector Magnitude (EVM) - PUSCH (6.5.2.1) .................................................................... 903.1.19.
Error Vector Magnitude (EVM) - PUCCH (6.5.2.1) .................................................................... 913.1.20.
Error Vector Magnitude (EVM) - PRACH (6.5.2.1) .................................................................... 923.1.21.
PUSCH-EVM with exclusion period (6.5.2.1A) .......................................................................... 933.1.22.
Carrier leakage (6.5.2.2) ............................................................................................................ 943.1.23.
In-band emissions for non allocated RB - PUSCH (6.5.2.3) .................................................... 943.1.24.
In-band emissions for non allocated RB - PUCCH (6.5.2.3) .................................................... 963.1.25.
EVM equalizer spectrum flatness (6.5.2.4) .............................................................................. 983.1.26.
Occupied bandwidth (6.6.1) .................................................................................................... 1003.1.27.
Spectrum Emission Mask (6.6.2.1) ......................................................................................... 1013.1.28.
Spectrum Emission Mask for Multi-Cluster PUSCH (6.6.2.1_1) ............................................ 1033.1.29.
Adjacent Channel Leakage Power Ratio (6.6.2.3) ................................................................. 1043.1.30.
Adjacent Channel Leakage Power Ratio for HPUE (6.6.2.3_1) ............................................. 1063.1.31.
Adjacent Channel Leakage Power Ratio for Multi-Cluster PUSCH (6.6.2.3_2) .................... 1063.1.32.
Additional Maximum Power Reduction (A-MPR) (6.2.4) ....................................................... 1073.1.33.
Additional Maximum Power Reduction (A-MPR) for HPUE (6.2.4_1) ................................... 108
3.1.34.
Additional Spectrum Emission Mask (6.6.2.2) ....................................................................... 1093.1.35.
RX MEASUREMENTS ............................................................................................................................110 3.2.
Reference sensitivity level (7.3) .................................................................................................1103.2.1.
Maximum input level (7.4) ......................................................................................................... 1113.2.2.
3.2.3. Spurious emissions (7.9) ............................................................................................................112
TX MEASUREMENTS FOR CA ................................................................................................................113 3.3.
TX Measurements for Inter-band CA ........................................................................................1133.3.1.
TX Measurements for Intra-band Contiguous CA .................................................................. 1293.3.2.
RX MEASUREMENTS FOR CA............................................................................................................... 148 3.4.
Reference sensitivity level for CA (intra-band contiguous DL CA and UL CA) (7.3A.1) ........ 1483.4.1.
Reference sensitivity level for CA (intra-band contiguous DL CA without UL CA) (7.3A.2) .. 148
3.4.2.
Reference sensitivity level for CA (inter-band DL CA without UL CA) (7.3A.3) ...................... 1493.4.3.
Reference sensitivity level for CA (intra-band non-contiguous DL CA without UL CA) 3.4.4.