Ontario Drive & Gear Limited www.odg.com
PH.(519)- 662-2840 FAX (519)- 662-2421
TR-27A
Argo Service Manual Transmission
TR-109
TR-110 TR-111
TR-112
19. Next, push the Reverse Shift Shaft and
Block down against the Housing boss
(out of reverse). Install (3) 109-05 Steel
Balls into the Hi/Low Shift Shaft cavity
of the Housing, and push each one into
the machined hole at the Reverse Shift
Shaft. These (3) Steel balls will be lo-
cated between the Reverse Shift Shaft
and Hi/Low Shift Shaft. Photo TR-113
& 114
TR-113
TR-114
To Next Page
Loading...
