Arkray AUTION MAX AX-4030 - Page 10

AX-4030
11
AUTION MAX AX-4030 OPERATING MANUAL
G
2.8.4 Error and Trouble List (Automatic Report) .... 2-54
2.8.5 Trouble List (Manual Report) ........................ 2-55
2.8.6 Check Measurement Result Report ............... 2-56
2.8.7 List of Current Parameter Settings ................. 2-57
Chapter 3 Auxiliary Operations
3.1 Menu Configuration ............................................ 3-2
3.2 [Parameter settings] Menu ................................ 3-4
3.2.1 Assigning the Type of Test Strips
to the Item Racks ............................................. 3-4
3.2.2 Using a Different Results Format ..................... 3-4
3.2.3 Configuring the Measurement
Numbering Method ........................................... 3-6
3.3 [Results] Menu .................................................... 3-8
3.3.1 Printing/Transmitting Results ........................... 3-8
3.3.2 Reviewing Results/Editing IDs ....................... 3-12
3.3.3 Deleting Results and Trouble Logs
from Memory .................................................. 3-15
3.4 [Initial settings] Menu ....................................... 3-17
3.4.1 Setting the System Clock ............................... 3-17
3.4.2 Enabling/Disabling the Built-in Printer ............ 3-18
3.4.3 Enabling/Disabling the External Output ......... 3-20
3.4.4 Controlling the Beeper Volume ...................... 3-21
3.5 [Print] Menu ....................................................... 3-23
3.5.1 Printing a Trouble List .................................... 3-23
3.5.2 Printing the Abnormal Results List ................. 3-24
3.5.3 Printing the Current Parameter Settings ........ 3-25
3.6 [Maintenance] Menu .........................................3-27
3.6.1 Viewing Maintenance Information .................. 3-27
Chapter 4 Maintenance
4.1 Frequency of Maintenance ................................ 4-2
4.2 Daily Maintenance .............................................. 4-3
4.2.1 Cleaning the Waste Box ................................... 4-3
4.2.2 Discarding Liquid Waste from
the Drain Bottle ................................................ 4-5
4.2.3 Cleaning the Feeders ....................................... 4-6
4.2.4 Cleaning the Test Strip Stopper ....................... 4-8
4.2.5 Washing the Introduction Tray ....................... 4-12
4.3 Replacement of Consumables ........................ 4-15
4.3.1 Replacing the Washing Solution .................... 4-15
4.3.2 Replacing the Thermal Printer Paper ............. 4-17
4.4 Regular Maintenance ....................................... 4-18
4.4.1 Washing the Air Filter ..................................... 4-18
4.4.2 Washing the Transport Tray ........................... 4-19
4.4.3 Cleaning the S.G. Cell .................................... 4-24
4.4.4 Cleaning the Washing Bath ............................ 4-26
4.4.5 Replacing the Washing Solution Filter ........... 4-29
4.4.6 Replacing the Drain Pinch Valve Tubes ......... 4-30
4.4.7 Replacing the White Plate .............................. 4-32
4.5 Before/After Long Periods of Disuse.............. 4-34
4.5.1 Preparing the Instrument Before
Long Periods of Disuse .................................. 4-34
4.5.2 Starting the Instrument Up
After Long Periods of Disuse ......................... 4-37
Chapter 5 Troubleshooting
5.1 When a Warning Occurs ....................................5-2
5.1.1 From Warning Generation to Remedy ............. 5-2
5.1.2 Causes and Remedies ..................................... 5-3
W001 – W003 ............................................. 5-3
W004 – W009 ............................................. 5-4
W010 – W011 ............................................. 5-5
5.2 When an Error Occurs ....................................... 5-6
5.2.1 From Error Generation to Remedy ................... 5-6
5.2.2 Causes and Remedies ..................................... 5-7
E101 – E104 ............................................... 5-7
E110 – E120 ............................................... 5-8
E130 – E140 ............................................... 5-9
5.3 When Trouble Occurs ...................................... 5-10
5.3.1 From Trouble Generation to Remedy ............ 5-10
5.3.2 Causes and Remedies ................................... 5-11
T999, T201 – T203 ...................................5-11
T210 – T220 ............................................. 5-12
T221 – T222 ............................................. 5-13
T223 – T240 ............................................. 5-14
T241 – T261 ............................................. 5-15
T270 – T290 ............................................. 5-16