Arkray AUTION MAX AX-4030 User Manual

AX-4030
3-27
AUTION MAX AX-4030 OPERATING MANUAL
[Maintenance] Menu3.6
The [Maintenance] menu screen has 4 hardware maintenance options. This section describes the
procedure for the [4. Maintenance information] option only. For instructions for other options, see
the respective pages in chapters 2 and 4.
Options Descriptions See page(s)
1. S.G. cell washout Washes the S.G. cell.
4-24
2. Clean washing bath and tray Moves the mechanical parts to make enough room to
access the washing bath and transport tray.
4-19
4-26
3. Check measurement Measures a check strip to examine the instrument.
2-43
4. Maintenance information Allows you to view a list of dates when maintenance
tasks were last performed (S.G. calibration, S.G.
cell washout, washing bath/tray cleaning, and check
measurement).
This page
3.6.1 Viewing Maintenance Information
You can view a list of dates when maintenance tasks were last performed. These tasks include S.G.
calibration, S.G. cell washout, washing bath and transport tray cleaning, and check measurement.
1 Access the setup screen.
1 On the standby screen, press Menu to go to the
[Main menu] screen.
2 Press 5 to go to the [Maintenance] screen.
2 Display the maintenance information.
1 Press 4 to go to the [Maintenance information]
screen.
Menu Meas No. Strip S.G. Cal
Main menu
(0000) 2006-01-09 11:00
1 Parameter settings
2 Results
3 Initial settings
4 Print
5 Maintenance
Go back
Maintenance
(5000) 2006-01-09 11:00
1 S.G. cell washout
2 Clean washing bath and tray
3 Check measurement
4 Maintenance information

Arkray AUTION MAX AX-4030 Specifications

General

Brand	Arkray
Model	AUTION MAX AX-4030
Category	Measuring Instruments
Language	English