AX-4030
2-9
AUTION MAX AX-4030 OPERATING MANUAL
Measurement Precautions2.2
2.2.1 Handling the Instrument
This instrument is to be operated by qualified persons only. A qualified
person is one having adequate knowledge of clinical testing and the
disposal of infectious waste. Thoroughly read this operating manual
before use. Anyone who operates the instrument for the first time must be
assisted by a trained person.
Never touch the nozzle, tubing, or other parts where sample may adhere
with unprotected hands. During cleaning or maintenance of these parts,
wear protective gloves to prevent exposure to pathogenic microbes.
Discard used samples, liquid waste, parts, and instrument in accordance
with local regulations for biohazardous waste.
Read “1.4.1 Precautions in Instrument Installation” on page 1-18, and
ensure the instrument is installed in a proper environment before turning
on the power.
Do not place containers or bottles that contain liquid on the instrument.
Spilling inside the instrument may cause damage to the components.
Never fail to clean or wash the specified components of the instrument
to maintain measurement quality. For more information, see chapter 4
“Maintenance”.
If you detect abnormal odors or noise, immediately turn off the standby
switch and then main power switch, and unplug the power cord.
Continuous operation in such condition may result in fire or damage to the
instrument and consequently lead to personal injury.
In case of instrument trouble, contact your local distributor for repair.
Unauthorized servicing or remodeling can damage the instrument and
consequently lead to personal injury.
Alcohol is sometimes needed to prepare measurements. Alcohol is readily
combustible, therefore handle it carefully and keep away from flames,
electrical sparks and sources of heat. Also, ventilate the room sufficiently
during use.
The following sections describe precautions you should take when
handing instrument, samples, and test strips. When you use the
instrument for the first time, read through these sections before start
measurement.
To Next Page
Loading...
Need help?
General
