AX-4030
4-29
AUTION MAX AX-4030 OPERATING MANUAL
D
4.4.5 Replacing the Washing Solution Filter
The nozzle of the washing solution bottle has a stainless steel filter. A clogged filter may cause
trouble with the flow line system. Replace the filter with a new one once a month.
Prepare: Washing solution filter (supplied as “filter set”) and tweezers
1 Turn off the power.
1 Make sure the standby screen is displayed, then
press the standby switch to turn off the power.
2 Replace the washing solution filter.
1 Turn the filter holder by hand to disassemble it, and
remove the filter with tweezers.
2 Fit a new filter into the recess of the filter holder.
NOTE: The washing solution filter is easily
deformed. Handle the filter with care.
3 Screw the filter holder in to assemble it.
3 Check for leaks.
1 Press the standby switch to turn on the power.
2 During warm-up, check the filter holder connection
for leaks.
• If a leak is found, tighten the filter holder securely.
3 Make sure the standby screen appears.
To Next Page
Loading...
