AX-4030
3-17
AUTION MAX AX-4030 OPERATING MANUAL
[Initial settings] Menu3.4
3.4.1 Setting the System Clock
The internal system clock may not keep the right time after initially installing the instrument or a
long period of disuse. Set the system clock to the exact time. The date and time that appear on the
display and printed reports follow the system clock.
REFERENCE: The instrument supports three date formats: “year-month-day (default)”, “day-
month-year”, and “month-day-year”. This section explains the procedure based on the “year-
month-day” format. If you are using another format, set a new date accordingly. To have the
date format parameter setting changed, contact your distributor.
1 Access the setup screen.
1 On the standby screen, press Menu to go to the
[Main menu] screen.
2 Press 3 to go to the [Initial settings] screen.
3 Press 1 to go to the [System clock setup] screen.
2 Adjust the date and time.
1 Below [Date], enter the date of today.
• To move through the year, month, and day entry
fields, press the hyphen key.
• To move down to the [Time] entry field, press .
2 Below [Time], enter the current time.
• To move between the hour and minute entry fields,
press the hyphen key.
To Next Page
Loading...
