AX-4030
2-1
AUTION MAX AX-4030 OPERATING MANUAL
Measurement
2.1 Before Making Measurements.................................2-2
2.1.1 Flowchart of Operational Procedure ...........
2-2
2.1.2 Measurement and Calibration .....................
2-3
2.1.3 Measurement Terminology .........................
2-4
2.1.4 Sample Containers and Sample Racks ......
2-7
2.2 Measurement Precautions .......................................2-9
2.2.1 Handling the Instrument ..............................
2-9
2.2.2 Handling Samples .....................................2-10
2.2.3 Handling Test Strips .................................2-11
2.3 Preparation for Measurement................................2-12
2.3.1 Checking Wastes and Consumables ........2-12
2.3.2 Turning on the Power ...............................2-14
2.3.3 Loading Test Strips into the Feeders ........2-16
2.3.4 Assigning the Type of
Test Strips to the Item Racks ........2-19
2.3.5 Preparing Samples ...................................2-21
2.4 Measurement Operations ......................................2-23
2.4.1 Normal Measurement: Measuring
Samples Continuously ...................
2-23
2.4.2 Port STAT Measurement: Measuring
a Higher Priority Sample
................2-27
2.4.3 Rack STAT Measurement: Measuring
Higher Priority Samples .................2-31
2.5 S.G. Calibration.......................................................2-34
2.5.1 Preparing S.G. Standard Solutions ...........
2-34
2.5.2 Starting S.G. Calibration ...........................
2-36
2.6 Control Measurement.............................................2-38
2.7 Check Measurement...............................................2-43
2.8 Displayed and Printed Reports .............................2-49
2.8.1 Displayed Results Report .........................
2-49
2.8.2 Printed Results Report ..............................
2-50
2.8.3 Abnormal Results List ...............................
2-54
2.8.4 Error and Trouble List
(Automatic Report) .......................
2-54
2.8.5 Trouble List (Manual Report) ...................
2-55
2.8.6 Check Measurement Result Report ..........
2-56
2.8.7 List of Current Parameter Settings ...........
2-57
Chapter
2