AX-4030
3-25
AUTION MAX AX-4030 OPERATING MANUAL
2 Print the abnormal results list.
1 Press 2 to print the abnormal results list.
REFERENCE: The message “Not found.” will
appear if there is no matching data in memory.
Press OK to return to the [Print] screen.
• After the completion of the printout, the [Print]
screen will appear again.
2 Press Go back twice on the [Print] screen to return
to the standby screen.
3.5.3 Printing the Current Parameter Settings
You can obtain a list of parameter settings that includes printer and external output use, beeper
volume, and the type of test strips for each feeder.
1 Access the setup screen.
1 On the standby screen, press Menu to go to the
[Main menu] screen.
2 Press 4 to go to the [Print] screen.
To Next Page
Loading...
