Arkray AUTION MAX AX-4030 - Enabling;Disabling the External Output

3-20
AX-4030
AUTION MAX AX-4030 OPERATING MANUAL
3.4.3 Enabling/Disabling the External Output
The instrument has two data output terminals on the rear panel, which are disabled by default.
When you connect external devices to these terminals, change the parameter setting to enable the
external output.
1 Access the setup screen.
1 On the standby screen, press Menu to go to the
[Main menu] screen.
2 Press 3 to go to the [Initial settings] screen.
3 Press 3 to go to the [External output setup] screen.
2 Enable or disable the external output.
1 Below [Use/No use], select [Use] or [No use] using
the hyphen key.
2 Press OK .
• A message window will open to ask if you want to
save the new setting.
Menu Meas No. Strip S.G. Cal
Main menu
(0000) 2006-01-09 11:00
1 Parameter settings
2 Results
3 Initial settings
4 Print
5 Maintenance
Go back
Initial settings
(3000) 2006-01-09 11:00
1 System clock setup
2 Printer setup
3 External output setup
4 Beeper volume setting
External output setup
(3300) 2006-01-09 11:00
Use/No use
[Use ]
OK Cancel