AX-4030
2-49
AUTION MAX AX-4030 OPERATING MANUAL
B
Displayed and Printed Reports2.8
This section describes what information the displayed and printed reports provide.
REFERENCE: Any information including results and error lists is not printed out if the built-in
printer is disabled (see “3.4.2 Enabling/Disabling the Built-in Printer” on page 3-18).
2.8.1 Displayed Results Report
When at least one result is obtained by normal measurement, Results will appear on the lowest line
of the screen. Pressing Results displays the result on the screen in the format shown below. The
obtained results are stored in memory and can be retrieved on the screen later by key operation. For
more information about the components from 1 to 8 in the figure, see the appropriate sections in
“2.8.2 Printed Results Report” on the next page.
Example
View
Date 2006-01-09 11:16 Kind NORMAL
No. 0150 Po. 001-05 Strip 1: 9EB
ID 000000000000000000
GLU - *PRO 4+
BIL - URO NORMAL
PH 7.0 !BLD +-
*KET 4+ NIT -
LEU -
TURB - S.G. 1.000
COLOR LIGHT YELLOW
<<<<<<<< >>>>>>>> Go back
3. Measurement date and time, 1. Type of measurement
1. Measurement No., 4. Rack-port No., 4. Feeder and test strip
2. ID
5. Results obtained with test strip
6. Turbidity, 7. Specific gravity
8. Color-tone
To Next Page
Loading...
