Arkray AUTION MAX AX-4030 - Page 12

AX-4030
1-1
AUTION MAX AX-4030 OPERATING MANUAL
G
Before Use
1.1 Outline of the AX-4030 .............................................1-2
1.1.1 What You Can Do with the AX-4030 ..........
1-2
1.1.2 Features ......................................................1-3
1.1.3 Specifications .............................................
1-5
1.1.4 Measurement Principle ...............................
1-6
1.1.5 Rank Table ...............................................
1-11
1.2 Unpacking ...............................................................1-13
1.2.1 Instrument .................................................1-13
1.2.2 Sampler ....................................................1-13
1.2.3 Accessories ..............................................1-14
1.2.4 Accessory Case ........................................
1-15
1.3 Components ............................................................1-16
1.3.1 Front View .................................................
1-16
1.3.2 Rear View .................................................
1-17
1.4 Installation...............................................................1-18
1.4.1 Precautions in Instrument Installation .......
1-18
1.4.2 Unlocking the Instrument ..........................
1-20
1.4.3 Attaching the Sampler ..............................
1-23
1.4.4 Installing the Washing Solution Bottle ......
1-26
1.4.5 Installing the Drain Bottle ..........................
1-28
1.4.6 Installing the Waste Box ...........................
1-29
1.4.7 Connecting the Power Cord and
External Devices
............................1-30
1.5 Starting Up ..............................................................1-31
1.5.1 Turning On the Power for the First Time ..
1-31
1.5.2 Setting up the Printer and System Clock ..
1-33
1.5.3 Turning Off the Power ...............................
1-34
1.6 Relocation ...............................................................1-35
1.6.1 Precautions in Instrument Relocation .......
1-35
1.6.2 Checking for Leftover Test Strips .............
1-35
1.6.3 Discharging the Washing Solution ............
1-36
1.6.4 Unplugging the Power Cord ......................
1-36
1.6.5 Disconnecting the Tubes,
Sensor Code, and Cables .........................
1-37
1.6.6 Detaching the Sampler .............................
1-38
1.6.7 Relocating the Instrument .........................
1-39
1.7 Basic Operations ....................................................1-40
1.7.1 Components on the Operator Panel .........
1-40
1.7.2 Screen Configuration ................................
1-41
1.7.3 Menu Operations and Examples ..............
1-42
Chapter
1