AX-4030
3-13
AUTION MAX AX-4030 OPERATING MANUAL
3 Specify a range of results.
1 Specify the range of results you want.
For [Measurement No.]/[Port No.]
• Enter the start number.
• Press to go to the end number entry field.
• Enter the end number, and go to step 2.
• Ensure the end number is larger than the start
number.
REFERENCE: For example, to enter “0150”, press
0, 1, 5, 0 in that order. To correct the entry, press
BS to delete digits one by one, and enter a
new value.
REFERENCE: For information on 4-digit port
numbers used here, see “REFERENCE” in
“Rack-port number” in “2.1.3 Measurement
Terminology” on page 2-4.
For [ID]
• Enter the ID of the result you want using the
alphanumeric keys. An ID can contain up to 18
digits, and can include numbers, alphabet, and
special characters (see page 1-45).
• Go to step 2.
• The ID can also be input by having the optional
hand-held barcode reader read a barcode from the
labeled sample.
REFERENCE: For detailed instructions, see “ID”
in “Entering Alphanumerics” in “1.7.3 Menu
Operations and Examples” on page 1-45. To
correct the entry, press BS to delete digits
one by one, and enter a new value.
2 Press OK to display the results.
[Measurement No.] setup
[Port No.] setup