Arkray AUTION MAX AX-4030 User Manual

AX-4030
4-35
AUTION MAX AX-4030 OPERATING MANUAL
2 Uncap the washing solution bottle and discard the
remaining solution.
3 Rinse the bottle with purified water.
4 Fill the bottle with purified water and cap it.
5 Press the standby switch to turn on the power.
• During warm-up, the instrument will aspirate the
purified water to fill the flow lines.
4 Clean the components.
1 Clean the feeders.
• See “4.2.3 Cleaning the Feeders” on page 4-6.
2 Clean the waste box.
• See “4.2.1 Cleaning the Waste Box” on page 4-3.
3 Wash the introduction and transport trays.
• See “4.4.2 Washing the Transport Tray” on page
4-19.
5 Discharge the purified water from the flow lines.
1 Make sure the standby screen is displayed, then
press the standby switch to turn off the power.
2 Uncap the washing solution bottle.
• Place the cap on tissue paper to protect it against
dust.
3 Press the standby switch to turn on the power.
• During warm-up, purified water will be discharged
from the flow lines.
Fill the bottle
with purified water
Cap

Arkray AUTION MAX AX-4030 Specifications

General

Brand	Arkray
Model	AUTION MAX AX-4030
Category	Measuring Instruments
Language	English