AX-4030
2-33
AUTION MAX AX-4030 OPERATING MANUAL
B
4 Start the rack STAT measurement.
How the STAT measurement takes place depends on the status of the instrument.
If the instrument is on standby:
1 Press to measure the samples in the STAT and
control rack.
• Samples are processed in the same way as those for
normal measurement.
If measurement is underway:
• STAT measurement will start when the STAT and
control rack reaches the sample aspirating position.
Samples are processed in the same way as those for
normal measurement.
5 When rack STAT measurement is completed…
• When the sample aspiration of the STAT and control rack is completed, the rack will be
discharged to the unloading side of the sampler.
1 When aspiration of the remaining normal measurement samples is completed, take the sample
racks out of the sampler.
To Next Page
Loading...
