System module Description Documented in HPE Switch
hardware/software guide
ssl Secure Socket Layer Version 3
(SSLv3), including Transport Layer
Security (TLSv1) support: Provides
remote web access to a switch via
encrypted paths between the switch
and management station clients
capable of SSL/TLS operation.
Access Security Guide
stack Stack management: Uses a single
IP address and standard network
cabling to manage a group (up to
16) of switches in the same IP
subnet (broadcast domain),
resulting in a reduced number of IP
addresses and simplified
management of small workgroups
for scaling your network to handle
increased bandwidth demand.
Advanced Traffic Management
Guide
stp Multiple-instance spanning tree
protocol/MSTP (802.1s): Ensures
that only one active path exists
between any two nodes in a group
of VLANs in the network. MSTP
operation is designed to avoid loops
and broadcast storms of duplicate
messages that can bring down the
network.
Advanced Traffic Management
Guide
system Switch management, including
system configuration, switch
bootup, activation of boot ROM
image, memory buffers, traffic and
security filters.
System messages also include
events from management interfaces
(menu and CLI) used to reconfigure
the switch and monitor switch status
and performance.
Management and Configuration
Guide
Access Security Guide
tacacs TACACS+ authentication: A central
server is used to control access to
the switches (and other TACACS-
aware devices) in the network
through a switch's console port
(local access) or Telnet (remote
access).
Access Security Guide
Table Continued
Chapter 16 Troubleshooting 337
To Next Page
Loading...
