Aruba 2530 - Page 338

System module Description Documented in HPE Switch
hardware/software guide
tcp Transmission Control Protocol: A
transport protocol that runs on IP
and is used to set up connections.
Advanced Traffic Management
Guide
telnet Session established on the switch
from a remote device through the
Telnet virtual terminal protocol.
Management and Configuration
Guide
tftp Trivial File Transfer Protocol:
Supports the download of files to
the switch from a TFTP network
server.
Management and Configuration
Guide
timep Time Protocol: Synchronizes and
ensures a uniform time among
interoperating devices.
Management and Configuration
Guide
update Updates (TFTP or serial) to HPE
switch software and updates to
running-config and start-up config
files
Management and Configuration
Guide
vlan Static 802.1Q VLAN operations,
including port-and protocol-based
configurations that group users by
logical function instead of physical
location
A port-based VLAN creates a
layer-2 broadcast domain
comprising member ports that
bridge IPv4 traffic among
themselves.
VLAN messages include events
from management interfaces (menu
and CLI) used to reconfigure the
switch and monitor switch status
and performance.
Advanced Traffic Management
Guide
xmodem Xmodem: Binary transfer feature
that supports the download of
software files from a PC or UNIX
workstation.
Management and Configuration
Guide
Using the Menu
To display the Event Log from the Main Menu, select Event Log. The following example shows a sample event
log display.
338 Aruba 2530 Management and Configuration Guide for
ArubaOS-Switch 16.05