AT&T 75 - Page 418

Information Outlets
4-59
Station Cables
4-60
Closets
4-61
Site Locations
4-61
Satellite Locations
4-63
Station Circuit Distribution From Equipment Room
4-64
4-Pair Station Circuits
4-64
3-Pair to 4-Pair Station Circuit Distribution
4-66
Layout
4-71
Locating Information Outlets
4-71
Locating Satellites and Sites
4-71
Adapter Requirements
4-71
66-Type Hardware Requirements
4-71
Sizing 4-Pair Station Cables (DIW)
4-71
Sizing 25-Pair and Multiple 25-Pair Station Cables
4-71
3-Pair Station Cable Circuits
4-71
4-Pair Station Cable Circuits
4-72
STATION WIRING AND ASSOCIATED HARDWARE INSTALLATION
4-72
Installing the Station Cables
4-72
Installing 66-Type Hardware at Satellite Locations
4-74
Labeling
4-74
Installing 4-Pair Station Cables
4-74
Installing the Information Outlets
4-74
ADJUNCT POWERING
4-75
Adjunct Powering From the Equipment Room
4-75
Adjunct Powering From the Satellite Locations
4-76
Adjunct Powering From Site Locations
4-76
Adjunct Powering From Information Outlets
4-78
JUMPER WIRE INSTALLATION AND ADMINISTRATION
4-81
Equipment Room Cross-Connect Field
4-84
Installing Jumper Wires
4-84
Removing Jumper Wires
4-85
Installing and Removing Power Adapter Cords
4-85
Satellite Locations
4-86
1-Point Administration
4-86
2-Point Administration
4-86
-iii-