AudioCodes MediaPack MP-124 User Manual

SIP User's Manual 100 Document #: LTRT-65415
MediaPack Series
3.3.2.3.3 Configuring RTP/RTCP Settings
The 'RTP/RTCP Settings' page configures the Real-Time Transport Protocol (RTP) and
Real-Time Transport (RTP) Control Protocol (RTCP) parameters. For a detailed description
of the parameters appearing on this page, refer to ''Configuration Parameters Reference''
on page 333.
¾ To configure the RTP/RTCP parameters:
1. Open the 'RTP/RTCP Settings' page (Configuration tab > VoIP menu > Media
submenu > RTP/RTCP Settings).
Figure 3-63: RTP/RTCP Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 169.

AudioCodes MediaPack MP-124 Specifications

General

Model	MediaPack MP-124
Category	Gateway
Protocols	SIP, H.323, MGCP
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Fax Support	T.38
Management	SNMP
Security	TLS/SRTP
Power Supply	100-240 VAC, 50/60 Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-25 to 70°C
Humidity	10% to 90%, non-condensing
Analog Ports	24 FXS