AudioCodes MediaPack MP-124 User Manual

SIP User's Manual 112 Document #: LTRT-65415
MediaPack Series
3.3.2.6.2 Configuring Advanced Parameters
The 'Advanced Parameters' page allows you to configure advanced SIP control
parameters. For a description of the parameters appearing on this page, see
''Configuration Parameters Reference'' on page 333.
¾ To configure advanced general protocol parameters:
1. Open the 'Advanced Parameters' page (Configuration tab > VoIP menu > SIP
Definitions submenu > Advanced Parameters).
Figure 3-71: Advanced Parameters Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 169.

AudioCodes MediaPack MP-124 Specifications

General

Model	MediaPack MP-124
Category	Gateway
Protocols	SIP, H.323, MGCP
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Fax Support	T.38
Management	SNMP
Security	TLS/SRTP
Power Supply	100-240 VAC, 50/60 Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-25 to 70°C
Humidity	10% to 90%, non-condensing
Analog Ports	24 FXS