SIP User's Manual 58 Document #: LTRT-65415
MediaPack Series
3.3.1.1 Configuring Application Settings
The 'Application Settings' page is used for configuring various application parameters such
as Network Time Protocol (NTP), daylight saving time, and Network File System (NFS). For
a description of these parameters, see ''Configuration Parameters Reference'' on page
333.
¾ To configure application settings:
1. Open the 'Application Settings' page (Configuration tab > System menu >
Application Settings).
Figure 3-33: Application Settings Page
2. Configure the parameters as required.
3. For configuring NFS, under the 'NFS Settings' group, click the NFS Table button;
the 'NFS Settings' page appears. For a description of configuring this page, see
''Configuring NFS Settings'' on page 59.
4. Click the Submit button to save your
changes.
5. To save the changes to flash memory, see ''Saving Configuration'' on page 169.
To Next Page
Loading...
