SIP User's Manual 72 Document #: LTRT-65415
MediaPack Series
3.3.1.6.5 Configuring RADIUS Settings
The 'RADIUS Settings' page is used for configuring the Remote Authentication Dial In User
Service (RADIUS) accounting parameters. For a description of these parameters, see
''Configuration Parameters Reference'' on page 333.
¾ To configure RADIUS:
1. Open the ‘RADIUS Settings' page (Configuration tab > System menu >
Management submenu > RADIUS Settings).
Figure 3-44: RADIUS Parameters Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 169.
To Next Page
Loading...
