AudioCodes MediaPack MP-124 User Manual

SIP User's Manual 60 Document #: LTRT-65415
MediaPack Series
Table 3-4: NFS Settings Parameters
Parameter Description
Index The row index of the remote file system.
The valid range is 1 to 16.
Host Or IP The domain name or IP address of the NFS server. If a domain name is
provided, a DNS server must be configured.
Root Path Path to the root of the remote file system in the format: /[path]. For
example, '/audio'.
NFS Version NFS version used to access the remote file system.
 [2] NFS Version 2
 [3] NFS Version 3 (default)
Authentication Type Authentication method used for accessing the remote file system.
 [0] Null
 [1] Unix (default)
User ID User ID used in authentication when using Unix.
The valid range is 0 to 65537. The default is 0.
Group ID Group ID used in authentication when using Unix.
The valid range is 0 to 65537. The default is 1.
VLAN Type The VLAN type for accessing the remote file system.
 [0] OAM
 [1] MEDIA (default)
Note: This parameter applies only if VLANs are enabled or if Multiple
IPs is configured (see ''Network Configuration'' on page 316).

AudioCodes MediaPack MP-124 Specifications

General

Model	MediaPack MP-124
Category	Gateway
Protocols	SIP, H.323, MGCP
Voice Codecs	G.711, G.723.1, G.726, G.729A/B
Fax Support	T.38
Management	SNMP
Security	TLS/SRTP
Power Supply	100-240 VAC, 50/60 Hz
Operating Temperature	0°C to 40°C (32°F to 104°F)
Storage Temperature	-25 to 70°C
Humidity	10% to 90%, non-condensing
Analog Ports	24 FXS