Version 6.2 277 February 2011
SIP User's Manual 8. IP Telephony Capabilities
4. In the ‘Endpoint Phone Number Table’ page, configure Hunt Group ID #1 for channels
1-4, and Hunt Group ID #2 for channels 5-8.
Figure 8-24: Assigning Channels to Hunt Groups
5. In the 'Hunt Group Settings' page, configure 'Per Account' registration for Hunt Group
ID #1 (without serving IP Group) and associate it with IP Group #1; Configure 'Per
Endpoint' registration for Hunt Group ID #2 and associated it with IP Group #2.
Figure 8-25: Configuring Registration Mode for Hunt Groups and Assigning to IP Group
6. In the 'Authentication' page, for channels 5-8 (i.e., Hunt Group ID #2), define for each
channel the registration (authentication) user name and password.
Figure 8-26: Configuring Username and Password for Channels 5-8 in Authentication Page
7. In the 'Account Table' page, configure a single Account for Hunt Group ID #1,
including an authentication user name and password, and enable registration for this
Account to ITSP 1 (i.e., Serving IP Group is 1).
Figure 8-27: Configuring Account for Registration to ITSP 1
To Next Page
Loading...
