SIP User's Manual 150 Document #: LTRT-65415
MediaPack Series
¾ To configure the keypad features
1. Open the 'Keypad Features' page (Configuration tab > VoIP menu > GW and IP to
IP submenu > Analog Gateway submenu > Keypad Features).
Figure 3-92: Keypad Features Page
2. Configure the keypad features as required. For a description of these parameters, see
''Configuration Parameters Reference'' on page 333.
3. Click the Submit button to save your
changes.
4. To save the changes to the flash memory, see ''Saving Configuration'' on page 169.
To Next Page
Loading...
