Version 6.2 499 February 2011
SIP User's Manual 11. SIP Software Package
11 SIP Software Package
The table below lists the device's standard SIP software package.
Table 11-1: Software Package
File Name Description
Firmware (RAM CMP) File
MP124_SIP_<sw
ver.>.cmp
Image file containing the software for MP-124/FXS
MP118_SIP_<sw
ver.>.cmp
Common Image file Image file containing the software for MP-11x
ini Configuration Files
SIPgw_fxs_MP112.ini Sample ini file for MP-112/FXS
SIPgw_fxs_MP114.ini Sample ini file for MP-114/FXS
SIPgw_fxo_MP114.ini Sample ini file for MP-114/FXO
SIPgw_fxs_fxo_MP114.ini Sample ini file for MP-114/FXS/FXO
SIPgw_fxs_MP118.ini Sample ini file for MP-118/FXS
SIPgw_fxo_MP118.ini Sample ini file for MP-118/FXO
SIPgw_fxs_fxo_MP118.ini Sample ini file for MP-118/FXS/FXO
SIPgw_fxs_MP124.ini Sample ini file for MP-124/FXS
usa_tones_xx.dat Default loadable Call Progress Tones *.dat file
usa_tones_xx.ini Call Progress Tones ini file (used to create *.dat file)
Miscellaneous Files
SNMP MIBs MIB library for SNMP browser
Utilities
DConvert TrunkPack Downloadable Conversion Utility - to create Call Progress
Tones files
ACSyslog Syslog server
BootP/TFTP Server BootP/TFTP configuration utility
CPTWizard Call Progress Tones Wizard
Note: The device is supplied with a cmp file pre-installed on its flash memory.
However, if you are an AudioCodes registered customer, you can obtain the
latest cmp version files (as well as documentation and other software such as
the ini and MIB files, and Utilities) from AudioCodes Web site at
www.audiocodes.com/downloads (customer registration is performed online
at this Web site). If you are not a direct customer of AudioCodes, please
contact the AudioCodes’ Distributor and Reseller from whom this product was
purchased.
To Next Page
Loading...
Need help?
General
