Version 6.2 99 February 2011
SIP User's Manual 3. Web-Based Management
3.3.2.3.2 Configuring Fax/Modem/CID Settings
The 'Fax/Modem/CID Settings' page is used for configuring fax, modem, and Caller ID
(CID) parameters. For a detailed description of the parameters appearing on this page, see
''Configuration Parameters Reference'' on page 333.
¾ To configure the fax, modem, and CID parameters:
1. Open the 'Fax/Modem/CID Settings' page (Configuration tab > VoIP menu > Media
submenu > Fax/Modem/CID Settings).
Figure 3-62: Fax/Modem/CID Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 169.
Note: Some SIP parameters override these fax and modem parameters (see the
parameter IsFaxUsed, and V.152 parameters in Section ''V.152 Support'' on
page 253).
To Next Page
Loading...
