Version 6.2 23 February 2011
SIP User's Manual 1. Overview
1.2 MediaPack Features
This section provides a high-level overview of some of the many device supported
features. For more updated information on the device's supported features, refer to the
latest MP-11x & MP-124 SIP Release Notes.
1.2.1 MP-11x Hardware Features
The MP-11x series hardware features includes the following:
Combined FXS / FXO devices (four FXS and four FXO ports on the MP-118; two FXS
and two FXO ports on the MP-114).
MP-11x compact, rugged enclosure -- only one-half of a 19-inch rack unit, 1 U high.
Lifeline - provides a wired phone connection to the PSTN line that becomes active
upon a power or network failure (combined FXS/FXO devices provide a Lifeline
connection that's available on all FXS ports).
LEDs on the front panel that provide information on the device's operating status and
the network interface.
Reset button on the rear panel for restarting the MP-11x and for restoring the MP-11x
parameters to their factory default settings.
1.2.2 MP-124 Hardware Features
The MP-124 hardware features include the following:
MP-124 19-inch, 1U rugged enclosure provides up to 24 analog FXS ports, using a
single 50-pin Telco connector.
LEDs on the front panel that provide information on the device's operating status and
the network interface.
Reset button on the front panel for restarting the MP-124 and for restoring the MP-124
parameters to their factory default settings.
To Next Page
Loading...
Need help?
General
