Version 6.2 25 February 2011
SIP User's Manual 2. Configuration Tools
2 Configuration Tools
You can configure the device, using the following management tools:
îš„ The device's HTTP-based Embedded Web Server (Web interface), using any
standard Web browser (described in ''Web-based Management'' on page 27).
îš„ A configuration ini file loaded to the device (see ''ini File Configuration'' on page 193).
 AudioCodes’ Element Management System (see ''Element Management System
(EMS)'' on page 199).
îš„ Simple Net
work Management Protocol (SNMP) browser software (refer to the Product
Reference Manual).
Note: To initialize the device by assigning it an IP address, a firmware file (cmp),
and a configuration file (ini file), you can use AudioCodes' BootP/TFTP utility,
which accesses the device using the device's MAC address (refer to the
Product Reference Manual).
To Next Page
Loading...
Need help?
General
