Version 6.2 41 February 2011
SIP User's Manual 3. Web-Based Management
• ini file parameter name
• Link (in green) to its location (page) in the Web interface
• Brief description of the parameter
4. In the searched list, click the required parameter (link in green) to open the page in
which the parameter appears; the relevant page opens in the Work pane and the
searched parameter is highlighted for easy identification, as shown in the figure below:
Figure 3-13: Searched Result Screen
Note: If the searched parameter is not located, a notification message is displayed.
3.1.8 Working with Scenarios
The Web interface allows you to create your own "menu" with up to 20 pages selected from
the menus in the Navigation tree (i.e., pertaining to the Configuration, Maintenance, and
Status & Diagnostics tabs). The "menu" is a set of configuration pages grouped into a
logical entity referred to as a Scenario. Each page in the Scenario is referred to as a Step.
For each Step, you can select up to 25 parameters in the page that you want available in
the Scenario. Therefore, the Scenario feature is useful in that it allows you quick-and-easy
access to commonly used configuration parameters specific to your network environment.
When you login to the Web interface, your Scenario is displayed in the Navigation tree,
thereby, facilitating your configuration.
Instead of creating a Scenario, you can also load an existing Scenario from a PC to the
device (see ''Loading a Scenario to the Device'' on page 48).
To Next Page
Loading...
Need help?
General
