SIP User's Manual 40 Document #: LTRT-65415
MediaPack Series
¾ To organize the index entries in ascending, consecutive order:
Click Compact; the index entries are organized in ascending, consecutive order,
starting from index 0. For example, if you added three index entries 0, 4, and 6, then
the index entry 4 is re-assigned index number 1 and the index entry 6 is re-assigned
index number 2.
Figure 3-12: Compacting a Web Interface Table
¾ To delete an existing index table entry:
1. In the 'Index' column, select the index corresponding to the table row that you want to
delete.
2. Click Delete; the table row is removed from the table.
3.1.7 Searching for Configuration Parameters
The Web interface provides a search engine that allows you to search any ini file
parameter that is configurable by the Web interface (i.e., has a corresponding Web
parameter). You can search for a specific parameter (e.g., "EnableIPSec") or a sub-string
of that parameter (e.g., "sec"). If you search for a sub-string, all parameters that contain the
searched sub-string in their names are listed.
¾ To search for ini file parameters configurable in the Web interface:
1. On the Navigation bar, click the Search tab; the Search engine appears in the
Navigation pane.
2. In the 'Search' field, enter the parameter name or sub-string of the parameter name
that you want to search. If you have performed a previous search for such a
parameter, instead of entering the required string, you can use the 'Search History'
drop-down list to select the string (saved from a previous search).
3. Click Search; a list of located parameters based on your search appears in the
Navigation pane.
Each searched result displays the following:
To Next Page
Loading...
