EasyManuals Logo

AudioCodes MediaPack MP-124 User Manual

AudioCodes MediaPack MP-124
504 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #334 background imageLoading...
Page #334 background image
SIP User's Manual 334 Document #: LTRT-65415
MediaPack Series
Parameter Description
802.1xPassword is ignored.
Note: The configured mode must match the configuration of the
Access server (e.g., RADIUS server).
Web: 802.1x Username
EMS: User Name
[802.1xUsername]
Username for IEEE 802.1x support.
The valid value is a string of up to 32 characters. The default is an
empty string.
Web: 802.1x Password
EMS: Password
[802.1xPassword]
Password for IEEE 802.1x support.
The valid value is a string of up to 32 characters. The default is an
empty string.
Web: 802.1x Verify Peer
Certificate
EMS: Verify Peer Certificate
[802.1xVerifyPeerCertificate]
Verify Peer Certificate for IEEE 802.1x support.
[0] Disable (default)
[1] Enable
10.1.2 Multiple Network Interfaces and VLAN Parameters
The IP network interfaces and VLAN parameters are described in the table below.
Table 10-2: IP Network Interfaces and VLAN Parameters
Parameter Description
Web: Multiple Interface Table
EMS: IP Interface Settings
[InterfaceTable]
This ini file table parameter configures the Multiple Interface
table for configuring logical IP addresses. The format of this
parameter is as follows:
[InterfaceTable]
FORMAT InterfaceTable_Index =
InterfaceTable_ApplicationTypes,
InterfaceTable_InterfaceMode, InterfaceTable_IPAddress,
InterfaceTable_PrefixLength, InterfaceTable_Gateway,
InterfaceTable_VlanID, InterfaceTable_InterfaceName;
[\InterfaceTable]
For example:
InterfaceTable 0 = 0, 0, 192.168.85.14, 16, 0.0.0.0, 1,
Management;
InterfaceTable 1 = 2, 0, 200.200.85.14, 24, 0.0.0.0, 200,
Control;
InterfaceTable 2 = 1, 0, 211.211.85.14, 24, 211.211.85.1, 211,
Media;
The above example, configures three network interfaces
(OAMP, Control, and Media).
Notes:
For this ini file table parameter to take effect, a device reset
is required.
Up to 16 logical IP addresses with associated VLANs can be
defined (indices 0-15). However, only up to 8 interfaces can
be used for media RTP traffic (assigned to a Media Realm in
the 'SIP Media Realm' table, which in turn is assigned to an
IP Group).
Each interface index must be unique.

Table of Contents

Other manuals for AudioCodes MediaPack MP-124

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the AudioCodes MediaPack MP-124 and is the answer not in the manual?

AudioCodes MediaPack MP-124 Specifications

General IconGeneral
ModelMediaPack MP-124
CategoryGateway
ProtocolsSIP, H.323, MGCP
Voice CodecsG.711, G.723.1, G.726, G.729A/B
Fax SupportT.38
ManagementSNMP
SecurityTLS/SRTP
Power Supply100-240 VAC, 50/60 Hz
Operating Temperature0°C to 40°C (32°F to 104°F)
Storage Temperature-25 to 70°C
Humidity10% to 90%, non-condensing
Analog Ports24 FXS

Related product manuals