Version 6.2 93 February 2011
SIP User's Manual 3. Web-Based Management
¾ To configure the 802.1x parameters:
1. Open the '802.1x Settings' page (Configuration tab > VoIP menu > Security
submenu > 802.1x Settings).
Figure 3-57: 8021x Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, see ''Saving Configuration'' on page 169.
3.3.2.2.3 Configuring General Security Settings
The 'General Security Settings' page is used to configure various security features. For a
description of the parameters appearing on this page, refer ''Configuration Parameters
Reference'' on page 333.
¾ To configure the general security parameters:
1. Open the 'General Security Settings' page (Configuration tab > VoIP menu >
Security submenu > General Security Settings).
Figure 3-58: General Security Settings Page
2. Configure the parameters as required.
3. Click the Submit button to save your changes.
4. To save the changes to flash memory, refer to ''Saving Configuration'' on page 169.
To Next Page
Loading...
