SIP User's Manual 498 Document #: LTRT-65415
MediaPack Series
Parameter Description
Software/Configuration File URL Path for Automatic Update Parameters
[CmpFileURL]
Specifies the name of the cmp file and the path to the server (IP
address or FQDN) from where the device loads a new cmp file and
updates itself. The cmp file can be loaded using HTTP/HTTPS, FTP,
FTPS, or NFS.
For example: http://192.168.0.1/filename
Notes:
For this parameter to take effect, a device reset is required.
When this parameter is configured, the device always loads the
cmp file after it is reset.
The cmp file is validated before it's burned to flash. The
checksum of the cmp file is also compared to the previously
burnt checksum to avoid unnecessary resets.
The maximum length of the URL address is 255 characters.
[IniFileURL]
Specifies the name of the ini file and the path to the server (IP
address or FQDN) on which it is located. The ini file can be loaded
using HTTP/HTTPS, FTP, FTPS, or NFS.
For example:
http://192.168.0.1/filename
http://192.8.77.13/config<MAC>
https://<username>:<password>@<IP address>/<file name>
Notes:
For this parameter to take effect, a device reset is required.
When using HTTP or HTTPS, the date and time of the ini file are
validated. Only more recently dated ini files are loaded.
The optional string '<MAC>' is replaced with the device's MAC
address. Therefore, the device requests an ini file name that
contains its MAC address. This option allows the loading of
specific configurations for specific devices.
The maximum length of the URL address is 99 characters.
[PrtFileURL]
Specifies the name of the Prerecorded Tones file and the path to the
server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
[CptFileURL]
Specifies the name of the CPT file and the path to the server (IP
address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file.
Note: The maximum length of the URL address is 99 characters.
[TLSRootFileUrl]
Specifies the name of the TLS trusted root certificate file and the
URL from where it's downloaded.
Note: For this parameter to take effect, a device reset is required.
[TLSCertFileUrl]
Specifies the name of the TLS certificate file and the URL from
where it's downloaded.
Note: For this parameter to take effect, a device reset is required.
[UserInfoFileURL]
Specifies the name of the User Information file and the path to the
server (IP address or FQDN) on which it is located.
For example: http://server_name/file, https://server_name/file
Note: The maximum length of the URL address is 99 characters.
To Next Page
Loading...
Need help?
General
