SIP User's Manual 404 Document #: LTRT-65415
MediaPack Series
Parameter Description
VBD coders), see ''V.152 Support'' on page 253.
For a description of using ini file table parameters, see ''Configuring ini
File Table Parameters'' on page 194.
Web: IP Profile Settings Table
EMS: Protocol Definition > IP Profile
[IPProfile]
This ini file table parameter configures the IP Profile table. Each IP Profile ID
includes a set of parameters (which are typically configured separately using
their individual "global" parameters). You can later assign these IP Profiles to
Tel-to-IP routing rules (Prefix parameter), IP-to-Tel routing rules (PSTNPrefix
parameter), and IP Groups (IPGroup parameter).
The format of this parameter is as follows:
[IPProfile]
FORMAT IpProfile_Index = IpProfile_ProfileName, IpProfile_IpPreference,
IpProfile_CodersGroupID, IpProfile_IsFaxUsed, IpProfile_JitterBufMinDelay,
IpProfile_JitterBufOptFactor, IpProfile_IPDiffServ, IpProfile_SigIPDiffServ,
IpProfile_SCE, IpProfile_RTPRedundancyDepth,
IpProfile_RemoteBaseUDPPort, IpProfile_CNGmode,
IpProfile_VxxTransportType, IpProfile_NSEMode, IpProfile_IsDTMFUsed,
IpProfile_PlayRBTone2IP, IpProfile_EnableEarlyMedia,
IpProfile_ProgressIndicator2IP, IpProfile_EnableEchoCanceller,
IpProfile_CopyDest2RedirectNumber, IpProfile_MediaSecurityBehaviour,
IpProfile_CallLimit, IpProfile_DisconnectOnBrokenConnection,
IpProfile_FirstTxDtmfOption, IpProfile_SecondTxDtmfOption,
IpProfile_RxDTMFOption, IpProfile_EnableHold, IpProfile_InputGain,
IpProfile_VoiceVolume, IpProfile_AddIEInSetup,
IpProfile_SBCExtensionCodersGroupID,
IpProfile_MediaIPVersionPreference, IpProfile_TranscodingMode,
IpProfile_SBCAllowedCodersGroupID, IpProfile_SBCAllowedCodersMode,
IpProfile_SBCMediaSecurityBehaviour, IpProfile_SBCRFC2833Behavior,
IpProfile_SBCAlternativeDTMFMethod, IpProfile_SBCAssertIdentity,
IpProfile_AMDSensitivityParameterSuit, IpProfile_AMDSensitivityLevel,
IpProfile_AMDMaxGreetingTime,
IpProfile_AMDMaxPostSilenceGreetingTime, IpProfile_SBCDiversionMode,
IpProfile_SBCHistoryInfoMode;
[\IPProfile]
For example:
IPProfile 1 = ITSP, 1, 0, 0, 10, 10, 46, 40, 0, 0, 0, 0, 2, 0, 0, 0, 0, -1, 1, 0, 0, -
1, 1, 4, -1, 1, 1, 0, 0, , -1, 0, 0, -1, 0, 0, 0, 0, -1, 0, 8, 300, 400, -1, -1;
Notes:
You can configure up to nine IP Profiles (i.e., indices 1 through 9).
To use the settings of the corresponding "global" parameter, enter the
value -1 (or in the Web interface, the option 'Not Configured').
For a detailed description of each parameter, see its corresponding global
parameter:
IPProfile Field Web Name Global Parameter
IpProfile_Index
Profile ID -
IpProfile_ProfileNam
e
Profile Name -
IpProfile_IpPreferen
ce
Profile Preference -
To Next Page
Loading...
