Version 6.2 441 February 2011
SIP User's Manual 10. Configuration Parameters Reference
Parameter Description
Web: Time Between Call Waiting
Indications
EMS: Call Waiting Time Between
Indications
[TimeBetweenWaitingIndications]
Time (in seconds) between consecutive call waiting indications
for call waiting.
The valid range is 1 to 100. The default value is 10.
Note: This parameter is applicable only to FXS ports.
Web/EMS: Time Before Waiting
Indications
[TimeBeforeWaitingIndication]
Defines the interval (in seconds) before a call waiting indication
is played to the port that is currently in a call.
The valid range is 0 to 100. The default time is 0 seconds.
Note: This parameter is applicable only to FXS ports.
Web/EMS: Waiting Beep Duration
[WaitingBeepDuration]
Duration (in msec) of call waiting indications that are played to
the port that is receiving the call.
The valid range is 100 to 65535. The default value is 300.
Note: This parameter is applicable only to FXS ports.
EMS: First Call Waiting Tone ID
[FirstCallWaitingToneID]
Determines the index of the first Call Waiting Tone in the CPT
file. This feature enables the called party to distinguish between
different call origins (e.g., external versus internal calls).
There are three ways to use the distinctive call waiting tones:
Playing the call waiting tone according to the SIP Alert-Info
header in the received 180 Ringing SIP response. The value
of the Alert-Info header is added to the value of the
FirstCallWaitingToneID parameter.
Playing the call waiting tone according to PriorityIndex in the
ToneIndex ini file table parameter.
Playing the call waiting tone according to the parameter
“CallWaitingTone#' of a SIP INFO message.
The device plays the tone received in the 'play tone
CallWaitingTone#' parameter of an INFO message plus the
value of this parameter minus 1.
The valid range is -1 to 1,000. The default value is -1 (i.e., not
used).
Notes:
It is assumed that all Call Waiting Tones are defined in
sequence in the CPT file.
SIP Alert-Info header examples:
9 Alert-Info:<Bellcore-dr2>
9 Alert-Info:<http://…/Bellcore-dr2> (where "dr2" defines
call waiting tone #2)
The SIP INFO message is according to Broadsoft's
application server definition. Below is an example of such an
INFO message:
INFO sip:06@192.168.13.2:5060 SIP/2.0
Via:SIP/2.0/UDP
192.168.13.40:5060;branch=z9hG4bK040066422630
From:
<sip:4505656002@192.168.13.40:5060>;tag=1455352915
To: <sip:06@192.168.13.2:5060>
Call-ID:0010-0008@192.168.13.2
CSeq:342168303 INFO
Content-Length:28
Content-Type:application/broadsoft
play tone CallWaitingTone1
To Next Page
Loading...
Need help?
General
