Version 6.2 443 February 2011
SIP User's Manual 10. Configuration Parameters Reference
Parameter Description
Forwarding, use the parameter EnableForward.
If the parameter FwdInfo_Destination only contains a telephone
number and a Proxy isn't used, the 'forward to' phone number
must be specified in the 'Tel to IP Routing' (Prefix ini file
parameter).
For configuring this table using the Web interface, see
Configuring Call Forward on page 157.
For an explanation on using ini file table parameters, see
Configuring ini File Table Parameters on page 194.
Call Forward Reminder Ring Parameters
Notes:
These parameters are applicable only to FXS interfaces.
For a description of this feature, see Call Forward Reminder Ring on page 260.
Web: Enable NRT
Subscription
[EnableNRTSubscription]
Enables Endpoint subscription for Ring reminder event notification
feature.
[0] Disable (default)
[1] Enable
Web: AS Subscribe IPGroupID
[ASSubscribeIPGroupID]
Defines the IP Group ID that contains the Application server for
Subscription.
The valid value range is 1 to 8. The default is -1 (i.e., not
configured).
Web: NRT Retry Subscription
Time
[NRTRetrySubscriptionTime]
Defines the Retry period (in seconds) for Dialog subscription if a
previous request failed.
The valid value range is 10 to 7200. The default is 120.
Web: Call Forward Ring Tone
ID
[CallForwardRingToneID]
Defines the ringing tone type played when call forward notification is
accepted.
The valid value range is 1 to 5. The default is 1.
To Next Page
Loading...
Need help?
General
