3 Commissioning Procedure
Mk8 MM Manual Page | 102
3.8 Online Changes
Figure 3.8.i Online Changes Screen
The Online Changes is accessed by pressing on the system configuration screen, and then
entering the password. The Online Changes feature allows the following:
• Change non-safety critical options, parameters and expansion options
• Configure settings and labels for first outs
• Fuel flow commissioning
• Set bottom blowdown servomotor positions
• Adjust water level control point
• Reset burner history
• Reset fuel flow data
• Reset fault logs
• Reset system log
• Reset bottom blowdown log
• Reset boiler configuration
• Reset run times
• Reset steam flow metering
• Restart MM if the burner is in standby
To Next Page
Loading...
