AUTOFLAME Mk8 MM User Manual

12 Bottom Blowdown
Mk8 MM Manual Page | 237
12.6.2 Bottom Blowdown Log
Figure 12.6.1 Bottom Blowdown Log
On the home MM screen, press on the bottom blowdown valve to access the bottom blowdown log
screen. The bottom blowdown log stores the last 128 blowdowns, with the following information:
• Type of blowdown: scheduled, manual.
• Date and time of scheduled blowdown.
• Date and time the blowdown occurred.
• Number of repeats and the duration of blowdown.
The bottom blowdown status shows a timer for when the next blowdown is due. If expansion option 61 is set
for manual triggering, then when the next blowdown is due, the button must be pressed for the
valve to blowdown. The status will then show ‘waiting trigger’ until this is pressed, or a line voltage input is
detected on terminal MB on the bottom blowdown module. If the blowdown is not triggered, the log will show
the scheduled blowdown as ‘missed’
If the bottom blowdown reduction has been enabled in expansion option 62, then the calculated reduced
time will be displayed on the log.
The bottom blowdown log can be cleared in Online Changes.

AUTOFLAME Mk8 MM Specifications

General

Brand	AUTOFLAME
Model	Mk8 MM
Category	Controller
Language	English