3 Commissioning Procedure
Mk8 MM Manual Page | 73
3.4.1 Starting Commissioning
Figure 3.4.1.i Starting Commissioning
Once the options, parameters and expansion options have been set, press on the
Commission Mode screen in Figure 2.1.ii. If the MM has already been commissioned, then press
on the Home Display.
Figure 3.4.1.i shows the Commissioning screen. In the Commissioning screen, the 7 channel positions will
be shown, with the unused channels greyed out.
Once the MM goes through its internal relay checks and VPS (if optioned), the message ‘Select
Commissioning’ will display.
To Next Page
Loading...
