AUTOFLAME Mk8 MM - Expansion Board Inputs and Outputs

1 Mk8 MM Overview, Specifications and Wiring
Mk8 MM Manual Page | 21
1.3.2 Expansion Board Inputs and Outputs
Outputs:
120/230 V
All outputs with the exception of PF are switched neutrals
BFW
250mA
Must be connected through contactor
BB
250mA
Must be connected through contactor
HWV
100mA
(alarm indicator)
2LA
100mA
(alarm indicator)
2LV
100mA
(alarm indicator)
H1A
100mA
(alarm indicator)
1LV
100mA
(alarm indicator)
79
100mA
(alarm indicator on MM board)
TB
250mA
Solenoid only, must be connected through contactor
PF
Maximum 2A
(load currents for above terminals)
Note:
Max number of alarm indicators on at any time is 3 (1LV, 2LA, 2LV)
Main Voltage Signal Inputs:
At 120V current loading is approximately maximum 0.7mA per input.
At 230V current loading is approximately maximum 1.5mA per input.
Analogue Output Terminals
4-20mA Output Terminals
Maximum Voltage Drop Supported
10, 12
12V
13, 15
12V
16, 18
12V
I+, IV-
12V