18 Operation
Mk8 MM Manual Page | 340
18.13 Top Blowdown Screen
Figure 18.13.i Top Blowdown
Press on the TDS probe (if enabled) in the Home screen in Figure 18.1.i to view the Top Blowdown screen,
which shows the following information:
• Target TDS value
• Current TDS reading
• Top blowdown control state and timing
• Top blowdown servomotor angle
This data is logged for 24 hours on the MM. Use the buttons to change the timescale of the data
displayed and press and drag on the axis to zoom in/out of the graph.
This information is logged for 2 years on the DTI when connected with the MM.
Note: Power cycling the MM or changing fuel will reset the 24-hour history data log on the MM.
To Next Page
Loading...
