AUTOFLAME Mk8 MM - Steam Flow Screen; 18.15.1 Steam Flow - Status

18 Operation
Mk8 MM Manual Page | 343
18.15 Steam Flow Screen
18.15.1 Steam Flow – Status
Figure 18.15.1.i Steam Flow
Press on the steam header (if enabled) in the Home screen in Figure 18.15.1.i to view the Steam Flow
Status screen, which shows the following information:
• Current steam pressure
• Current steam temperature
• Heat in
• Steam flow rate
• Totalised steam flow
• Feed water temperature
• Make up water flow rate
• Make up water temperature
• Condensate water flow rate
• Condensate water temperature
• Boiler efficiency
Note: The information displayed will depend on the steam/ hot water flow metering configuration (expansion
option 120).