18 Operation
Mk8 MM Manual Page | 344
18.15.2 Steam Flow – History
Figure 18.15.ii Steam Flow
Press in the Steam Flow Status screen in Figure 18.15.1.i to view the Steam Flow History screen,
which shows the flow rate and heat in histories.
This data is logged for 24 hours on the MM. Use the buttons to change the timescale of the data
displayed and press and drag on the axis to zoom in/out of the graph.
This information is logged for 2 years on the DTI when connected with the MM.
Note: Power cycling the MM or changing fuel will reset the 24-hour history data log on the MM.
To Next Page
Loading...
