AUTOFLAME Mk8 MM User Manual

18 Operation
Mk8 MM Manual Page | 362
18.19.7 Set Clock
Figure 18.19.7.i Set Clock
Press in the System Configuration screen in Figure 18.19.i to access the Set Clock screen; you
will be prompted to enter the password (10, 10). Change the time and data using the arrows
and then press and then press .
Note: If the MM is connected to a DTI, then then time and data will be set by the DTI and cannot be adjusted
on the MM.

AUTOFLAME Mk8 MM Specifications

General

Brand	AUTOFLAME
Model	Mk8 MM
Category	Controller
Language	English