1 Mk8 MM Overview, Specifications and Wiring
Mk8 MM Manual Page | 13
1 MK8 MM OVERVIEW, SPECIFICATIONS AND WIRING
1.1 Mk8 MM Overview
The Mk8 MM Controller is a Micro-Modulating system that offers comprehensive control over industrial and
commercial boiler/burners.
With the Mk8 MM, it is possible to control all boiler processes from a single 12.1” multi-touch screen interface
without any added module. It is ideal for steam and water boilers (watertube or firetube), kilns and steam
generators. Designed for oil, natural gas or both fuel, the MM features linkageless servomotor system and
automated flame safeguard create conditions for unmanned boiler house.
Additional expansion features include:
• Autoflame water level management
• Analogue water level using third party water level detection system
• TDS/Top blowdown
• Bottom blowdown
• Draught control
• Direct Modbus connectivity
• First out annunciation
• Fully metered, cross-limited control
• Steam flow & hot water flow metering
• Modbus connectivity allows for remote monitoring and management
• Setpoint scheduling
• Fuel change on the fly
To Next Page
Loading...
Need help?
General
