18 Operation
Mk8 MM Manual Page | 361
18.19.6 Online Changes
Figure 18.19.6.i Online Changes Screen
Press in the System Configuration screen in Figure 18.19.i to access the Online Changes screen;
you be will be prompted to enter the Online Changes password. Please contact your local approved
Autoflame tech centre for this password. The Online Changes feature allows the following:
• Change non-safety critical options, parameters and expansion options
• Configure settings and labels for first outs
• Fuel flow commissioning
• Set bottom blowdown servomotor positions
• Adjust water level control point
• Reset burner history
• Reset fuel flow data
• Reset fault logs
• Reset system log
• Reset bottom blowdown log
• Reset boiler configuration
• Reset run times
• Reset steam flow metering
• Restart MM if the burner is in standby
To Next Page
Loading...
